The process of stripping the age-old finish off of your cabinets and exercising a brand-new discolor is going to take a lot of work. In guild how to restain kitchen cabinets, every inch of existing finish must be removed from the kitchen cabinets.
There are three methods used for stripping the age-old clear-coats and stain off. The most famous road that professionals get the ancient stuff off is by using some color remover. Another road is by using good old fashioned elbow grease and sanding paper. The final technique is used for removing color, and that is through exercising heat.
Whichever method you choose to use, your brand-new finish will only be as good as how well you prep the doors to receive the brand-new discolor and clear coatings. You can get into small-scale wrinkles and crevices by using a cable brush.
You can read: Lounge Kitchen Ideas – Dining Area With Bench Seat
Even if you are using stripper, you will still have to sand all of the cabinet percentages before exercising any of the brand-new finish. Your sanding can start with 100 grit and manipulate down various notches until you finish it off with 220 sand paper.
After every bit of the age-old finish has been removed and you have secured all the shortcomings with Grove putty, and through sanding, you can start refinishing your cupboards.
To do the restaining suitably, test an area of your kitchen cabinets firstly with the brand-new finishing fabrics. This is just a precautionary gradation is so that the brand-new discolor and transparent coatings are going to work fine. DO NOT omit this gradation. You will be very mad if you work the finishes on all of your kitchen cabinets and the varnish starts to illusion after a couple of hours.
When you are doing any refinishing employment, it is a good idea to never be in a hurry.
Steps for Restaining Cabinets in The Kitchen
Follow these steps after you have completed your experiment in an inconspicuous place on your kitchen cupboards.
- Apply the brand-new stain with a stud clean and allow it a few minutes to soak in.
- Wipe off the extra liquid with a clean cloth that is lint free.
- Make the stained faces dry for as long as the manufacturer hints.
- Apply your sanding sealer and allow a slew of drying age.
- Sand the sealer coat and reapply another one. Delicately sand that coat and then work two to three finish clear coatings.
You must never rush the process of restaining boards. If you don’t haste, your kitchen closets will turn out great with the new blot coloring and clear-coats. Thanks for reading and I hope the article about How To Restain Kitchen Cabinets useful for us.