Now roll up lines not only a quick and inexpensive way of blocking out the daylight and adding privacy, but they also add color, texture and can make a bold design statement or window space. There are two ways the blind can be fitted on the outside of the window facing or taken into the recess. If you choose to hang your curtains outside the recess, make sure that is wide enough to hang the brackets on the wall comfortably. If hanging inside, you may have to cut the blind down to fit and if you win very tall make sure the roller is long enough.
This distance is known as the drop. Now if you put in your blind up on the outside of the window what that gives us a much cleaner when the blinds down, bring them on the inside means things like photographs or advisor flowers can still be displayed.
If you pick me up lined up on the outside of the window what we’re aiming for is to get an equal distance either side of the window recess this gives us out. Which we’re going to fix our brackets to hold up the line if you’re facing the blinds into the recess as we are today.
You have to take the exact measurements of the inside of the recess. The good thing about a roller blind on the window like this is that you don’t have to worry about the measurements of the drop as the excess, stays at the top of the roller blind.
Now, as we’re going to be fitting outlines the inside of the window recess. And then cut it down to a custom with we need to make sure that we are now enough of the gap either side. So, we can move up and down freely.
One other thing you’re going to need to check before you buy your blind if that it can be cut down to a custom size. Cutting your blinds down to fit your window space is very straightforward. The best thing we’ve done is taking the end because of the bottom of the blind. Now, we’re going to roll a seat onto a flat, clean set this to the lower part of the blind facing awkward, so you’re marking the back of the blind. We know we need to put 90 mail off the end of the blind, so mark it off with the light pencil mark and continue full land of the blind. Mark in the last mark on the actual roller itself. Now with the Straight Edge get your pencil line now with the sharp pair of scissors and taking your time comes along your pencil line.
You can read: Tips to Choose the Perfect Rug Size
You can also use a sharp craft knife, because if you do put some water or something underneath to ensure a clean called to make sure you’ve got a new blade in if you’re using scissors. The long wallpaper type makes it easier to get a straighter course than using smaller ones, and now we’re ready to cut the roller now roller blinds are usually made of either plastic cardboard or aluminum and can be easily cut with Axel.
Remember, we need to cut the same amount of their bottom bead as we did with the roller blind. This also can be done with a hacksaw. You now need to decide which side you want to control your blind. We’re going to be hanging out from the right-hand side so finding the cord that pulls the screen up and down and locating the bracket that fits with it.
You can read: Step Up to Storage
We know that this bracket is the one that’s going to be fixed to the right-hand side of our window frame. Now, we have a couple of options for fixing our bracket we can even fix into the timber frame or the masonry work, but before you drill into the mainstream. Do make sure the ad tech whether there’s any pipes or any cables in the way. Always wear your dust mask and goggles and drill a pilot hole.
First, we’re going to be drilling into the timber. Do you remember to leave enough room at the top of the bracket so that the brain can roll up and taking a brad oh we’re going to mark the top and the bottom of Our bracket? These are the points that we are going to fix and screws into taking your time locating the screw into the hole you made the bridal. We’re going to repair a laptop screen; we are using self-tapping screws which can be spooked directly into the ground. If you’re using standard screws, drill a small pilot hole, then we repeat the same process on the other side of the window.
So, as we did with our first bracket, we need to measure down the same distance to the top of our bracket, then take the second bracket and mark out upper and lower house and then take the screws. All we need to do now is fit the end up and lift the blind into position. But the job’s not quite done these pulley calls can be potential hazards two small children and young babies, and they need to be secured to the wall with the safety bracket supplied with your blind hold the security bracket in place.
Mark the screw holes check for wires and pipes for the detector and bear in mind that may detect the still in the tool sometimes used in modern buildings. If you’re in any doubt about these results, contact a professional. Finally, feel the home pushing the rule plugs and screw in the bracket. Also, remember never to place any bard’s thoughts or any other furniture that small child could climb up and reach.