Now, I’m going to repair a set of washes faucets this euro stream and I’m not a fan of them, but I am going to prepare them for them. The first thing you do whenever you’re working on a device that’s turning your water off. Yes, believe it or not, some people worked on the not turned off. So, the second thing you’re going to do is plug your drain, and the reason I connect the drain is you don’t have any screws or small objects going down the drain in the urine job.
Number two: Trying to retrieve them the way the handle coming off the set of faucets. Little rubber grommet right in the side and that would slide down the drain, pretty easily. There’s an Allen set screw that holds the hand onto the to the cartridge lifting it up now. If you see something like this, right away you’re thinking.
Okay, I have to take that screw well, the nut that holds the cartridge in place will slide right over that piece could easily. So, your type is potato down – so this is a stainless steel, stainless steel plate at the bottom of this cartridge is excellent down inside here whenever you’re working to set of sauces.
It’s always good for a handy down inside the body itself. There are a spring and washer and what some people do is sprinkle or shower and ready to go. What some people do, they’ll stretch the spring a little, and it will help with your league. But eventually it’s going to come by because your seat gets quite flat see they have a favorite of iron here in the water and that’s the way then that’s the way the spring and this seat go back in.
So, that’s the old one just a little peek at that looks like, but it flattens out, and your spring doesn’t get a little weak. Some people take this season and just stretch it a little bit That will work not a fan of it. So what I’m going to do is I take a small screwdriver, drop my seat over it, then the spring goes into the position just like so going to take that place it down into the hole and just let it slide right off the screwdriver that way there.
You can read: L-Shaped Kitchen Design Ideas
You know it is in the correct place there we go, men, are working around a little bit with it, once you get it their bus part that works can I sometimes say a little bit play around to get that spring place. See, once you get into the industry is a matter of putting the cartridge back in.
Tighten this up a little tight of them. I didn’t have to take the faucet in place as well. It is a simple repair spring and a washer, they say it’s not of them say it washes, but I classified as a machine rubber seat. So okay so far the wire back onto your dad’s back in business, anyway, that’s helping you with any project you may have a great day.